Basic Info.
Model NO.
Centerless lathe
Diameter Range
Dia6-Dia40mm
Diameter Tolerance
Less Than It9
Diameter Cutting Depth
0.5-1.0mm
Transport Package
in Wooden Case
Specification
2.5*2.2*1.5m
Product Description
Introduction of Centerless Lathe
Series WXC centerless lathe is a high-efficiency lathe which is specialized in rough processing and finishing of the surface of slender shaft. Not only quickly remove surface hardened layer,cracks and other defects,but also can get high precision.
During processing, the bar tiself doesn't rotate. The cutter head drives the tools rotating at high speed to peeling the surface of the bar. At the same time, after peeling, the bar keeps walking straight ahead. The machine suits for processing the bars and wire rods.
List of Main Technical Parameters of Centerless Lathe
| Model | Diameter Range | Length Required | Feeding Speed | Diameter Cutting Depth | Diameter Tolerance | Surface Roughness | Total Capacity | CNC Or Not |
| WXC40C | φ6-φ40mm | ≥1400mm | 1-10m/min | 0.5-1.0mm | IT≤9 | Ra≤6.3μm | 40KW/55KW | Semi-automatic |
| WXC40S | φ6-φ40mm | ≥1400mm | 1-12m/min | 0.5-2.0mm | IT≤9 | Ra≤6.3μm | 55KW | CNC |
| WXC60B | φ14-φ65mm | ≥2200mm | 1-6m/min | 0.5-2.0mm | IT≤9 | Ra≤6.3μm | 55KW | Semi-automatic |
| WXC60C | φ14-φ65mm | ≥2200mm | 1-8m/min | 0.5-2.0mm | IT≤9 | Ra≤6.3μm | 55KW | Semi-automatic |
| WXC80C | φ20-φ85mm | ≥2200mm | 1-8m/min | 0.5-2.5mm | IT≤9 | Ra≤6.3μm | 75KW | Semi-automatic |
| WXC80S | φ20-φ85mm | ≥2200mm | 1-12m/min | 0.5-2.5mm | IT≤9 | Ra≤6.3μm | 95KW | CNC |
| WXC100C | φ25-φ100mm | ≥3000mm | 0.5-8m/min | 1.0-4.0mm | IT≤9 | Ra≤6.3μm | 95KW/110KW | Semi-automatic |
| WXC100S | φ25-φ100mm | ≥3000mm | 0.5-10m/min | 1.0-4.0mm | IT≤9 | Ra≤6.3μm | 110KW | CNC |
| WXC130C | φ40-φ135mm | ≥2800mm | 0.3-5m/min | 1.0-5.0mm | IT≤9 | Ra≤6.3μm | 130KW | Semi-automatic |
| WXC130S | φ40-φ135mm | ≥2800mm | 0.3-7m/min | 1.0-5.0mm | IT≤9 | Ra≤6.3μm | 130KW | CNC |
| WXC160C | φ45-φ165mm | ≥4000mm | 0.3-4m/min | 1.0-5.0mm | IT≤10 | Ra≤6.3μm | 180KW | Semi-automatic |
| WXC160S | φ45-φ165mm | ≥4000mm | 0.3-6m/min | 1.0-5.0mm | IT≤10 | Ra≤6.3μm | 210KW | CNC |
| WXC200C | φ85-φ205mm | ≥4000mm | 0.3-3m/min | 1.0-5.0mm | IT≤10 | Ra≤6.3μm | 210KW | Semi-automatic |
| WXC200S | φ85-φ205mm | ≥4000mm | 0.3-5m/min | 1.0-5.0mm | IT≤10 | Ra≤6.3μm | 250KW | CNC |
| WXC260C | φ100-φ260mm | ≥4000mm | 0.2-2m/min | 1.0-5.0mm | IT≤10 | Ra≤6.3μm | 210KW | Semi-automatic |
| WXC260S | φ100-φ260mm | ≥4000mm | 0.2-3m/min | 1.0-5.0mm | IT≤10 | Ra≤6.3μm | 260KW | CNC |
| WXC350C | φ150-φ360mm | ≥4500mm | 0.2-2m/min | 1.0-10.0mm | IT≤10 | Ra≤6.3μm | 465KW | Semi-automatic |
| WXC350S | φ150-φ360mm | ≥4500mm | 0.2-3m/min | 1.0-10.0mm | IT≤10 | Ra≤6.3μm | 465KW | CNC |
Features of Centerless Lathe
Following advantages compared with ordinary lathe:
1. When processing over-length bar, centerless lathe has incomparable advantages. Ordinary lathe is good at processing short bar. But there is great restricion for processing long shaft. In theory, centerless lathe can process the bar of infinite length.
2. Centerless lathe is not only processing bar,also wire rod. Including from wire rod to wire rod and from wire rod to bar.That the ordinary lathe can't do it.
3. Porcessing speed 1-12m/min, the working effeciency of centerless lathe is dozens of times of the ordinary lathe.
4. High pricision, after peeling,tolerance of diameter reach ≤IT9,surface roughness Ra≤6.3μm.But after straightening, Ra ≤0.8μm.
Introduction of Composition
1.Main machine consists of the bed,main bearings,air/oil lubrication system, front-clamping pinch feeding and rear-clamping extracting, front guide and middle-rear guide system,main driving system etc.
2.Air/oil lubrication system is specially designed to solve the lubrication of mainshaft bearings with high speeds rotation. It's composed of pump, oil and air distribution bolck and air processing compnents.
3.Cutting luquid circulation cooling system consist of recycle water pump, pipeline,nozzle etc.
4.High pressure water pump takes the cutting liquid cooled from reservoir through pipeline transporting the near to the nozzle of cutter head,until spraying on the tools and scraps.Then take away most the cutting heat and enter into chip conveyor mouth of at the bottom of cutter head,through the pipeline reflow reservoir for cooling.
5.Chip conveyor is provided by our supplier.The scraps through chip conveyor mouth to be taken to the chain plate and driving belt move with the scraps. Finally, the scraps are centralized collection.
6.Hydraulic system consists of pump set of motor, all kinds of control valves, hydraulic oil tank, hydraulic pipeline etc. Through controling the cylinders of front-clamping pinch feeding and rear-clamping extracting to realize clamping and loosening for the bar.
7.Electrical system includes power supply system and control system, by 1 power distribution cabinet and 1 button station intergrated coperation, implement pinch before and after the main transmission system, feeding system, cooling system, hydraulic, system,the electrical control of chip conveyor and auxiliary machine.
FAQ
1 Q: What's the payment term?
A: T/T 30% for down payment, Then T/T balance on the actual weight of ready for shipment products on the basis of the Seller's account.
2 Q: How to ensure your products is qualified?
A: The Quantity and weight of product are certified by the seller's Inspection Certificate and the quality is certified by the Mill Taste Certificate agreed form.
3 Q: How to confirm the Acceptance of Goods and Quality Control?
A: Once the manufacturing of a batch is complete, two samples will be acquired at random by the buyer's representatives for testing at independent labs. One sample will be sent to a lab in Seller's country and the other sample to a lab in buyer's country.
How To Contact Us
