Basic Info.
Processing Accessory
Centre CNC Lathe
Guide Rail
Horizontal Guide Rail
Tool Holder
Double-tool Holder CNC Lathe
Controlling Mode
Artificial
Automatic Grade
Automatic
Lengthrequired
Above 2200mm
Diameter Cutting Depth
0.5-2.5mm
Surface Roughness
Ra≤6.3μm
Transport Package
Wooden Case
Specification
As products details
Product Description
Details information of WXC80S
Specification | WXC80C |
RAW MATERIALS | Diameter Range(mm) | Φ20~Φ85 |
Raw Material Length(mm) | ≥2200 |
Tensile Strength (M pa) | ≤1100 |
Surface Hardness | ≤HB320 |
Curvature(mm/m) | ≤1.50 |
Diameter Tolerance | According to GB 702-2004 second group |
Roundness(mm) | ≤50% of the diameter tolerance |
Surface Roughness(Ra) | ≤25~50μm |
FINISHED GOODS | Diameter Range | Φ19~Φ79 |
Unilateral Cutting Depth(mm) | 0.25~1.25 |
Diameter Tolerance | ≤IT9 (standard tolerance grade) |
Surface Roughness(Ra) | ≤3.2μm |
Roundness(mm) | ≤0.03mm |
Feeding Cutting Speed(m/min) | 1.0-10.0(for continuous chips and high strength and hardness should reduce the speed) |
Cutter Head Rotational Speed(rpm) | 290~800 (Six Poles) 430~1200(Four Poles) |
Main Machine Motor Power(KW) | 75 |
Auxiliary Machine Motor Power(KW) | 5.5(feeding part)+0.75(discharging part) |
Main Machine Outline Dimensions (Length*Width*Height) m | 3.5m X 3.5m X 2.4m |
Full Set Machine Outline Dimensions (including auxiliary machine) (Length*Width*Height) m | 15.5m X 5.0m X 2.4m |
Main Machine Weight (including auxiliary weight) (T) | 8.5 (11.5) |
Total Capacity(KW) | 95 |
Compressed Air Source (user prepare by themselves) | 0.5-0.8Mpa,1.8m3/min\0.8m3 gasholder\two-stage oil-water separator and compressed air freezing drier |
Introduction of Centerless Lathe
Series WXC Centerless Lathe is a high efficiency lathe which is specialized in rough processing and finishing of the surface of slender shaft. Not only quickly remove surface hardened layer, cracks and other defects, but also can get high precision.
During processing, the bar itself doesn't rotate. The cutter head drives the tools rotating at high speed to peeling the surface of the bar. At the same time, after peeling, the bar keeps walking straight ahead. The machine suits for processing the bars and wire rods.
Series WXC Centerless Lathe includes semi-automatic hydraulic type and CNC type.
Features of Centerless Lathe
Following advantage compared with ordinary lathe:
1. When processing over-length bar, Centerless Lathe has incomparable advantages. Ordinary lathe is good at processing short bar. But there is great restriction for processing long shaft. In theory, Centerless Lathe can process the bar of infinite length.
2. Centerless Lathe is not only processing bar, also wire rod. Including from wire rod to wire rod and from wire rod to bar.That the ordinary lathe can't do it.
3. Processing speed 1~12m/min, the working efficiency of Centerless Lathe is dozens of times of the ordinary lathe.
4.High precision, after peeling, tolerance of diameter reach≤IT9, surface roughness Ra≤6.3μm. But after straightening, Ra≤0.8μm.
Introduction of Composition
1. Main machine consists of the bed, main bearings, air/oil lubrication system, front-clamping pinch feeding and rear-clamping extracting, front guide and middle-rear guide system, main driving system etc.
2. Air/oil lubrication system is specially designed to solve the lubrication of main shaft bearings with high speed rotation. It's composed of pump, oil and air distribution block and air processing components.
3. Cutting liquid circulation cooling system consist of recycle water pump. Pipeline, nozzle etc.
4. High pressure water pump takes the cutting liquid cooled from reservoir through pipeline transporting the near to the nozzle of cutter head, until spraying on the tools and scraps. Then take away most the cutting heat and enter into chip conveyor mouth of at the bottom of cutter head, through the pipeline reflow reservoir for cooling.
5. Chip conveyor is provided by our supplier. The scraps through chip conveyor mouth to be taken to the chain plate and driving belt move with the scraps. Finally, the scraps are centralized collection.
6. Hydraulic system consists of pump set of motor, all kinds of control valves, hydraulic oil tank, hydraulic pipeline etc. Through controlling the cylinders of front clamping pinch feeding and rear clamping extracting to realize clamping and loosening for the bar.
7.Electrical system includes power supply system and control system, by 1 power distribution cabinet and 1 button station integrated operation, implement pinch before and after the main transmission system, feeding system, cooling system, hydraulic system, the electrical control of chip conveyor and auxiliary machine.
Contact Us
Mr. Billy Hu
Mobile: +8618742524412
Address:
No. 654 Beishan Road, Dalian, Liaoning, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
DLDT is short for Dalian Jingtai Industry Trade Co., Ltd.
DLDT is specialized in high speed steel, high temperature alloy, special steel products and other same kind of steels. It registered in 2002 and owns importing and exporting rights, which engages in international trade. The company has passed ISO9001 quality management system certificate.
DLDT service:
1. DLDT accept the customized shape and size.
2. DLDT offer OEM and LOGO service.
3. DLDT offer trading agent service.
4. DLDT offer local agent service.
DLDT aim at improve ourself and help all of our clients to happy in the business.